0.6 kW |
 |
1.2 kW |
 |
1.8 kW |
 |
2 kW |
 |
3 kW |
 |
|
High-Frequency Spindles
Up to 60.000 Rpm
If small tools are used for machining, high speeds are required for a high cutting output in order to manufacture high quality workpieces in a cost-effective manner.
DATRON offer high-frequency (HF) spindles in several power categories for speeds ranging from 3,000 - 60,000 rpm. These spindles run smoothly, deliver highly accurate results, and can be used for a wide range of applications.
The following high-frequency spindles are available:
PowerS
Powerful and extremely precise HF spindles with HSK-E tool inserts for high quality and economy during processing. Speeds up to 40,000 rpm and large cutting capacities are possible.
HighS
For High-speed processing:HS high-frequency spindles with automatic tool changer for milling, drilling and engraving; for easier high-speed processing.
HighS/K
HS high-frequency spindles with automatic HSK-E taperred tool changer. For the especially precise milling, drilling and engraving the HighS spindles are equipped with a HSK-E tapered tool changer.
EcoS
for Plastics and Nonferrous Metal: Particularly sturdy high-frequency spindles with automatic tool changer for milling, drilling and engraving at speeds up to 30,000 rpm.
Benefits
- Hybrid ball bearings, compact construction, and a high rigidity based on a special bearing arrangement result in a very high run-out accuracy of up to 2 µm.
- An electronic fine balancing system results in quiet and low-vibration operation.
- Wear-proof and maintenance-free three phase current asynchronous motors and a lifetime lubrication reduce maintenance expenditure to a minimum.
- Air lock prevents dirt and dust from entering the inner part of the spindle.
- The pneumatically actuated tool holding fixture enables an automatic tool change.
Characteristics
| HF-Spindles | Characteristics |
|---|---|
| 600 W HF-Spindle (High Speed) | Rotation speed 6.000 - 60.000 RPM.; pneumatic tool change; tool shank diameter 1 mm - 6 mm |
| 1,2 kW HF-Spindle | Rotation speed 5.000 - 28.800 RPM.; pneumatic tool change; tool shank diameter up to 8 mm |
| 1,8 kW HF-Spindle | Rotation speed 5.000 - 48.000 RPM; HSK-E 25 clamping; tool shank diameter up to 10 mm |
| 2,0 kW HF-Spindle | Rotation speed 6.000 - 60.000 RPM; pneumatic tool change; tool shank diameter 1 mm - 8 mm |
| 3,0 kW HF-Spindle | Rotation speed 1.000 - 40.000 RPM; HSK-E 25 clamping; tool shank diameter up to 10 mm |